Section Removed); Av-Mag Installation Location And Interference Monitor - uAvionix AV-30-E Installation Manual

11.3.9

(Section removed)

11.3.10

AV-Mag Installation Location and Interference Monitor

Identify a mounting location on the aircraft. Suitable mounting locations
include the tail and either wing. The cockpit is an unsuitable mounting
location for the AV-Mag.
Proximity to ferrous materials and current-generated magnetic fields can
negatively affect AV-Mag performance. Avionics, engines, wing spars,
pitot heaters, lights, etc. are all potential sources of interference. Any
interference which varies during flight may generate erroneous headings
from the AV-Mag. Because of this, the installation location should be as
far as practical from these types of interferers. Inspect existing wiring
near the installation location and repair or refresh any deteriorated
insulation or corroded connections. Because wire loops generate
magnetic fields, avoid locations near wires forming physical loops.
The fourth screen of the AVMAG INSTL menu is a magnetic field
interference monitor with a checklist of aircraft systems which may be
sources of interference.
UAV-1004234-001, AV-30-E Installation Manual
Rev H
60