uAvionix AV-30-E Service Bulletin
  1. Manuals
  2. Brands
  3. uAvionix Manuals
  4. GPS
  5. AV-30-E
  6. Service bulletin

uAvionix AV-30-E Service Bulletin

Hide thumbs Also See for AV-30-E:
Table of Contents

Advertisement

Quick Links

Download this manual
AV-30-E
Service Bulletin
Software Upgrade to 2.3.3
Service Bulletin
UAV-1005757-005
Rev A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AV-30-E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for uAvionix AV-30-E

Summary of Contents for uAvionix AV-30-E

  • Page 1 AV-30-E Service Bulletin Software Upgrade to 2.3.3 Service Bulletin UAV-1005757-005 Rev A...
  • Page 2 retained.

  • Page 3: Revision History

    1 Revision History Revision Date Comments 9/2/2022 Initial release Service Bulletin UAV-1005757-005 Rev A...

  • Page 4: Warnings / Disclaimers

    2 Warnings / Disclaimers uAvionix is not liable for damages arising from the use or misuse of this product. This equipment is classified by the United States Department of Commerce's Bureau of Industry and Security (BIS) as Export Control Classification Number (ECCN) 7A994.

  • Page 5: Table Of Contents

    3 Table of Contents Revision History ................... 3 Warnings / Disclaimers ................ 4 Table of Contents ................5 Planning Information ................7 Applicability ................... 7 Description ..................8 Time Required ................9 Weight and Balance ..............9 Electrical Load Data ..............9 Applicable Publications ..............
  • Page 6 GYRO CAL ................2928 MAG CAL ................3231 9.7.1 Internal Magnetometer ............3231 9.7.2 AV-Mag External Magnetometer ........3332 10 System Checkout ................3534 11 Support ..................3635 12 Maintenance Record ..............3736 Service Bulletin UAV-1005757-005 Rev A...

  • Page 7: Planning Information

    4 Planning Information 4.1 Applicability This Service Bulletin applies to uAvionix AV-30-E UAV-1004035-001 and UAV-1004035-002 with operating software release 2.3.2 or earlier. For improvement in DG function, the unit must be connected to pitot and static if not already connected. Use Table 4-1 to determine applicability of the software update.

  • Page 8: Description

    4.2 Description This Service Bulletin provides instructions for loading uAvionix AV-30-E UAV-1004035-001 and UAV-1004035-002 with updated software release 2.3.3. This software release (2.3.3) has the following changes: • Adds a ‘Ground Test Mode’ command for testing a BeaconX transponder • Adds support for the Trio Pro Pilot digital autopilot •...

  • Page 9: Time Required

    4.3 Time Required For Internal Magnetometer addition, unit must be returned to uAvionix to update hardware. For software only update in the field, up to 90 minutes is required to perform this update procedure. Additional time may be required if pitot and static connections are not installed.

  • Page 10: Required Items

    Support website at no charge, at: https://uavionix.com/av-30-e-service-bulletin-software-upgrade-2-3-3/ Click on the link in the section AV-30-E v2.3.3 Firmware and save it to your PC or mobile device. Ensure the software and any necessary update tools have been downloaded prior to visiting the aircraft.

  • Page 11: Av-Link-E

    AV-30-E Software as shown in Table 5-1 Software Update Files The uAvionix AV Update Tool is available on the website linked above in the section AV Update Tool. Download it to your PC. 5.2 AV-Link-E The following items are required to perform the update when using AV-...

  • Page 12: Update Notes

    Ensure you are running a previous version of AV-30-E software. Specifically, your AV-30-E should currently be running 2.3.2 or earlier. There are two approved methods for update of the AV-30-E. The AV-30-E can be updated using either a traditional direct serial connection or the AV- Link-E can be used to update the AV-30-E via wireless interface.

  • Page 13: Pc Serial Update

    7 PC Serial Update 7.1 Serial Update Preparation 1. Add wires to pins 8 and 15 to the AV-30-E harness if not already connected. Add an additional ground wire to either the existing ground from the AV-30-E harness or ground the new wire directly to aircraft ground.
  • Page 14 4. Apply power to the AV-30-E. Do not interrupt power during the update process. 5. Launch the previously downloaded AV Updater application. 6. On the AV Updater tool, select the appropriate COM Port from the dropdown menu and click “Connect”.
  • Page 15 5. Proper connection has been made when the message “Unit Detected” has appeared on the bottom left corner of the AV Updater Tool. The screen on the AV-30-E will go black for the remainder of this procedure. If “Unit Detected” does not appear, contact uAvionix Support for additional guidance.
  • Page 16 8. Select “Write Firmware” to begin the upload. DO NOT POWER OFF THE AV-30-E OR CLOSE THE UPDATER TOOL UNTIL THE UPDATE IS COMPLETE. THE SCREEN OF THE AV-30-E WILL GO BLACK DURING THE UPDATE. THIS BEHAVIOR IS NORMAL AND THE STARTUP SCREEN WILL APPEAR AFTER REBOOTING.
  • Page 17 When the AV Update Tool displays “100%” and the lower status reads “Update Complete” the process is complete. 10. The unit will automatically restart. Upon restart of the unit, verify the startup screen indicates the updated software version. 11. If the unit was removed to perform the update it can now be reinstalled as per the installation manual.
  • Page 18 13. Following the completion of the update, follow Section 9 to perform required post-installation procedures. Service Bulletin UAV-1005757-005 Rev A...

  • Page 19: Update Via Av-Link-E

    AV-Link-E web interface. The web interface is accessible through any PC or mobile device. Ensure the PC or device has the AV-30-E software listed in Table 5-1 Software Update Files downloaded and available. The following instructions show the update procedure when using a Windows PC.
  • Page 20 1. Apply power to the AV-30-E and AV-Link-E. Do not interrupt power during the update process. 2. If using an Apple iPhone or iPad, you must put the device into Airplane Mode, then turn on Wi-Fi only. 3. Connect a PC to the AV-Link-E Wi-Fi Network.
  • Page 21 4. In a Web Browser (such as Google Chrome) navigate to the AV-Link- E home page via the following URL: 192.168.4.1 A page similar to shown on the right should appear. 5. At the bottom of the page select AV Firmware Update Service Bulletin UAV-1005757-005...
  • Page 22 6. On the AV Display Firmware Update page select Choose File then select the previously downloaded AV-30 firmware. 7. Once the file has been selected you will be prompted with “Install AV- 30-E v2.3.3 firmware?” Press OK to proceed. Service Bulletin UAV-1005757-005 Rev A...
  • Page 23 The screen on the AV-30-E will go black during the update. Apple iPhones and iPads will show 100% on the status bar very quickly but the update is not complete until you see the “Update complete” message. DO NOT power off the unit or close the web browser until the update is complete.
  • Page 24 8. Upon restart of the AV-30- E, verify the startup screen indicates the updated software version. Service Bulletin UAV-1005757-005 Rev A...
  • Page 25 9 Post-Accomplishment Verification and Actions On restart, verify that the startup screen displays the correct version number. Access the Installation Menu to complete post-accomplishment verification steps. 1. To enable access to the Installation Menu, ensure the unit is completely turned off. Push and hold the main control knob in while power is applied.
  • Page 26 Table 5-1 Software Update Files. Note that the checksum is not case sensitive. If all software fields match, continue with these instructions. Otherwise, contact uAvionix Support. The following sections detail new Installation Menu options and should be reviewed and set appropriately for your aircraft. Access the Installation Menu and rotate the center knob to select these settings.
  • Page 27 “NONE” will be displayed. The factory setting for non-magnetometer equipped units is NONE, and the factory setting for magnetometer equipped units is MAG1. Leave the AID Mode set to the default, unless otherwise direct by uAvionix Support. Service Bulletin UAV-1005757-005...
  • Page 28 To change the AID MODE, push and release the center knob then rotate the knob to select your choice of magnetometer aiding. Push and release the center knob to confirm and save. If the AV-Mag external magnetometer is installed, (P/N UAV-1006321-001), only one AID MODE option is allowed and cannot be changed: •...
  • Page 29 Push and release the center knob to start monitoring current and peak vibrations in the accelerometer and gyroscopic sensors. Record the data on the screen to share with uAvionix Support. Push and release the center knob again to stop monitoring vibration and return to the Installation Menu.
  • Page 30 For more information on Gyro Calibration, reference the procedure as described in “AV-30-E Installation Manual” UAV-1004234-001 Rev E (or latest available), Section 13.2.2. To perform the calibration, the aircraft must be completely motionless and on the ground. It should be located in a hangar and must not be affected by wind or other sources of aircraft movement.
  • Page 31 AV-30-E will indicate “Calibration successfully completed Press DONE”. Push the left button under “DONE” and the calibration will be complete. If an error is shown, repeat the calibration process. Service Bulletin UAV-1005757-005 Rev A...
  • Page 32 The internal magnetometer uses an in-flight procedure and the external magnetometer uses an on-ground 12-point compass procedure. The AV-30-E will retain all calibration after a software update. Starting with version 2.3.3 a hard reset will no longer reset the calibration data. Internal magnetometer and external magnetometer calibration data are stored separately.
  • Page 33 9.7.2 AV-Mag External Magnetometer If the AV-30-E installation has AV-Mag an external magnetometer, then an initial AV-Mag Calibration may need to be completed. This need will be indicated by a red flag indicating “MAG CAL”, once the “ALIGN” flag extinguishes.
  • Page 34 3. Follow the on-screen instructions, pressing the right button once the aircraft is oriented to heading 360. Keep the aircraft as motionless as possible at each of the headings while the “Calibration in progress” message is displayed. Service Bulletin UAV-1005757-005 Rev A...
  • Page 35 10 System Checkout Perform the System Checkout procedure as described in “AV-30-E Installation Manual” UAV-1004234-001 Section 13.2 prior to returning to service. Service Bulletin UAV-1005757-005 Rev A...
  • Page 36 11 Support For additional questions or support please visit: http://www.uavionix.com/support/ Service Bulletin UAV-1005757-005 Rev A...
  • Page 37 30-E UAV-1004035-006, has been complied with. A copy of this form must be submitted by visiting: https://uavionix.com/logbook/ Date: Aircraft Information Make: Model: Serial Number: Registration Number: AV-30-E Information Serial Number: Hardware Part Number: UAV-1004035-_____ Customer Information Name: Email: Telephone: Service Bulletin...

This manual is also suitable for:

Uav-1004035-001Uav-1004035-002

Table of Contents