Power Input (Required) - uAvionix AV-30-E Installation Manual

Indicated Airspeed (Textual)
V-Speeds (Graphical)
Baro Altitude (Textual)
Angle Of Attack (Graphical)
Vertical Trend (Graphical)
Vertical Speed (Textual)
Set Altitude (Textual)
Heading (Textual)
Bus Voltage (Textual)
G Load (Textual)
Outside Air Temp (Textual)
True Airspeed (Textual)
Density Altitude (Textual)
GPS Navigation / Waypoint Data
Textual Nav Data
Graphical Nav Data
Heading Bug
Hdg Bug (Ref Only if no AP)
Set Vertical Speed Bug
SVS Bug (Graphical)
Audio and Visual Alerting
AoA Alerting
G Limit Alerting
Excessive Roll Alerting
Misc.
Internal Battery Operation
Auto / Manual Brightness
Transponder Control
Traffic display
Internal Magnetometer aid
External Magnetometer aid

9.2.1 Power Input (Required)

Power input is required in both AI, DG and MFD configurations and each
unit has a dedicated circuit breaker. The power input is internally
connected, and diode protected with the unit's internal battery via a
processor-controlled switch. This architecture allows the unit to continue
operation if external power fluctuates or is completely lost. Input range is
compatible with both 12V and 24V aircraft.
UAV-1004234-001, AV-30-E Installation Manual
Rev H
✓ 
✓ 
✓ ✓
✓ 
✓ 
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
 ✓
✓ ✓
✓ 
✓ 
✓ 
✓ 
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
Pitot / Static
Pitot / Static
Pitot / Static
Pitot / Static
Pitot / Static
Pitot / Static
None
Pitot / Static
None
None
OAT Probe
Pitot / Static / OAT Probe
Pitot / Static / OAT Probe
GPS Navigator
GPS Navigator
None
Autopilot
Pitot / Static
None
None
Pitot / Static
None
Transponder serial / Pitot /
Static
AV-Link / GDL-90 / Pitot /
Static
Optional hardware / Pitot /
Static
AV-Mag / Pitot / Static
24