Aid Mode (Magnetometer) - uAvionix AV-30-E Installation Manual

EFIS+AVLINK An AV-Link is installed and a third-party EFIS is
SERIAL 4
If using the AV-Mag, set SERIAL 4 to AVMAG to enable the external
magnetometer aiding.
13.1.9

AID Mode (Magnetometer)

There are up to 3 options for the AID MODE, which controls the method
of aiding the AHRS DG functionality.
Value AHRS Aiding Source
NONE None used
MAG1 Internal magnetometer provides correction data to DG.
MAG2 Internal magnetometer provides correction data to DG and
aiding to core AHRS algorithm
AVMAG External magnetometer provides continuous heading data to
DG and aiding to core AHRS algorithm. AV-Mag only.
UAV-1004234-001, AV-30-E Installation Manual
Rev H
connected, MFD enabled
Value Serial 4 Source
NONE None available
AVMAG AV-Mag is installed
108