Download
Share
Print this page
uAvionix microLink Quick Start Manual
  1. Manuals
  2. Brands
  3. uAvionix Manuals
  4. Avionics Display
  5. microLink
  6. Quick start manual

uAvionix microLink Quick Start Manual

Hide thumbs Also See for microLink:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
microLink
Quick Start Guide
UAV-1005202-001
Rev A

Advertisement

loading

Related Manuals for uAvionix microLink

Summary of Contents for uAvionix microLink

  • Page 1 Quick Start Guide UAV-1005202-001 Rev A...

  • Page 2: Appendix A Quick Start Guide

    1 Appendix A Quick Start Guide The skyStation and airborne microLink radios are shipped from the factory with a default configuration that allows them to connect on power up right out of the box. This quick start guide illustrates the steps to get up and going with your pixHawk flight controller without any manual configuration.
  • Page 3 1.2 microLink • Connect the PixHawk2 TELEM 1 port to the microLink USER port (top connector). • Connect the microFYX GPS to the microLink CNTL radio port (bottom connector). Figure 1-2 Airborne microLink connections. • Apply power to your pixHawk. The TELEM 1 port supplies power to the microLink and to the microFYX.
  • Page 4 Figure 1-3 Automatic discovery. The IP address of the skyStation appears in the upper left If you encounter a message from Windows Defender Firewall when launching skyLinkApp, select Private Networks and press “Allow Access”. UAV-1005202-001 Rev A...
  • Page 5 • Connect Mission Planner to the skyStation using a TCP connection, the skyStation IP Address, and port number 30011. Figure 1-4 Select TCP connection type Figure 1-5 Enter the IP address of the skyStation UAV-1005202-001 Rev A...
  • Page 6 Figure 1-6 Enter the USER Data Port number from the skyStation (30011 default) • Use skyLinkApp to verify that the radios are connected. • Once connected and all the parameters are downloaded you are ready to plan your mission and fly! UAV-1005202-001 Rev A...