Av-Apa Wiring And Autopilot Configuration - uAvionix AV-30-E Installation Manual

11.4.6

AV-APA Wiring and Autopilot Configuration

The AV-APA analog output emulates the heading output of the Bendix
King KI-525A HSI within the KCS-55A system.
Ensure that your S-TEC control head (or GPSS module, if equipped) is
configured to use the KCS-55A. This will be stamped on a label on the
autopilot control head or GPSS module.
Your autopilot system is not configured to accept the KING KCS
55A input, see an authorized S-TEC dealer for modification.
UAV-1004234-001, AV-30-E Installation Manual
Rev H
76