uAvionix AV-30-E Installation Manual page 84

Display the SVS Bug
• Press 'Menu' and rotate the center knob clockwise 4 clicks to
select and enable the Vertical Trend indicator on the right side of
the inner circle
• Press and release the center knob
• Rotate the center knob until 'V TREND' is selected
• Press and release the center knob to save the selection
• Press the left button under 'Done'
Engage the Autopilot
• To enable the connection to the autopilot, push and release the
center knob until the 'AUTOPILOT' menu appears. Rotate the
knob clockwise to select the HDG BUG mode.
• The AV-30 is now sending serial data to the autopilot.
• Engage the autopilot via the autopilot's controls.
AeroCruze verification steps
UAV-1004234-001, AV-30-E Installation Manual
Rev H
84