Oat Interface; Gps Navigator Interface - uAvionix AV-30-C Installation Manual

13.2.3

OAT Interface

If an Outside Air Temperature (OAT) probe is connected, utilize the display
customization guidance provided in the Pilot's Guide to configure the display
to show OAT in at least one textual display field.
Note that OAT calibration is performed in the Setup procedures. This step
only ensures that the OAT probe is detected properly.
13.2.4

GPS Navigator Interface

If a GPS Navigator is connected, utilize the display customization guidance
provided in the Pilot's Guide to configure the display to show GPS
navigational data in at least one textual display field.
The image below shows a typical configuration that the pilot may setup.
UAV-1003947-001, AV-30-C, Installation Manual
Rev E
Figure 22 - OAT Indicator
Figure 23 - GPS Data Elements
43