Mode-S Or Atcrbs Limitations; Declaration Of Conformity (Doc) - uAvionix SkyEcho Addendum

6.2 Mode-S or ATCRBS Limitations

EC Devices do not replace the need for a transponder when required by
airspace/flight rules. Aeronautical Information Circular (AIC) Y 141/2019
allows for the use of EC devices simultaneously with ATCRBS or Mode S
transponders which are not Extended Squitter (ES) or ADS-B OUT
enabled. If your aircraft is ADS-B OUT enabled, you must disable the
transmit function of SkyEcho from the configuration settings. Receive
functionality may still be used. Deactivation of the transmitter is
accomplished by removing device power or disabling the transmit capability
via the configuration settings. These regulations are subject to change.
Please be informed of the most current regulations at:
https://www.caa.co.uk/General-aviation/Aircraft-ownership-and-maintenance/Electronic-
Conspicuity-devices/

6.3 Declaration of Conformity (DoC)

uAvionix Corporation declares that that the SkyEcho 2 ADS-B Transceiver
conforms with with the pertaining EU harmonization legislation and, since
31 January 2020, appropriate UK equivalents where applicable. Reference
the following standards which are applied:
• EN 62368-1:2014
• EN 62311:2008
• EN 61000-4-2:2009
• EN 61000-4-3:2006/A1/A2
• EN 303 413 V1.1.1
• Final Draft EN 301 489-1 V2.2.2 & EN 301 489-19 V2.1.1
• EN 300 328 V2.1.1 & EN 301 489-17 V3.2.4
The Notified Body Telification B.V., with Notified Body number 0560
performed: applicable Modules B+C
Where applicable:
The issued EU-type examination certificate: 192140399/AA/01
UAV-1006630-00
ECCN 7A994
REV A
Page
8 | 10