Aid Mode - uAvionix AV-30-C Installation Manual

NONE
AVLINK
13.1.7

AID Mode

Set AID MODE to NONE.
There are up to 3 options for the AID MODE, which controls the method of
aiding the AHRS DG functionality.
Value
NONE
MAG1
MAG2
Rotate the center knob until "AID MODE" is displayed. If the internal
magnetometer is available (P/N UAV-1003429-002) then you will have a
choice of NONE, MAG1, and MAG2. If the internal magnetometer is not
found, only "NONE" will be displayed.
UAV-1003947-001, AV-30-C, Installation Manual
Rev E
No source available
AV-Link – Do Not Enable unless authorized by
follow-on approval
AHRS Aiding Source
None used
Internal magnetometer provides correction data to
DG – Do Not Enable unless authorized by follow-
on approval
Internal magnetometer provides correction data to
DG and aiding to core AHRS algorithm – Do Not
Enable unless authorized by follow-on approval
Figure 16 - AID Mode Selection
39