Advanced Setup Menu; Security Setup Menu; Advanced Setup Menu Sub-Screens And Functions; Security Setup Menu Functions - Kontron AM4024 User Manual

9.2.2 Advanced Setup Menu

The Advanced Setup menu provides sub-screens and functions for advanced configuration.
Note:
Setting items on this screen to incorrect values may cause the system to malfunction.
Table 45: Advanced Setup Menu Sub-Screens and Functions
SUB-SCREEN
Processor Conf igu- CPU Flex Ratio Override
ration
CPU Flex Ratio Settings
ME Conf iguration ME FW Downgrade
9.2.3 Secur ity Setup Menu
The Security Setup menu provides information about the passwords and functions for specifying the
security settings. The passwords are case-sensitive. The AM4024(E) provides no factory-set passwords.
Table 46: Security Setup Menu Functions
FUNCTION
Supervisor Password is:
User Password is:
Set Supervisor Password
Supervisor Hint String
Set User Password
User Hint String
Min. password length
Authenticate User on Boot
HDD Password Select
HDD00 Password State
Set HDD00 User Password
TPM Suppor t
Note:
If there is already a password installed, the system asks for this first. To clear a password,
simply enter nothing and acknowledge by pressing <RETURN>. To set a password, enter it
twice and acknowledge by pressing <RETURN>.
Table 47: TPM Configuration Sub-Screen
FUNCTION
Current TPM State Read-only f ield.
TPM Action Enacts TPM Action.
Note: Most TPM actions require TPM to be enabled to take ef fect.
Omit Boot Measurements Enabling this option causes the system to omit recording boot device attempts in PCR[4].
www.kontron.com
FUNCTION
Enables/Disables CPU Flex Ratio Programming.
CPU Flex Ratio Settings: This value must be between Max. Ef f iciency
Ratio (LFM) and Maximum non-turbo ratio set by Hardware (HFM).
See Table 5, Features of the Processors Supported on the
AM4024(E), for possible LFM/HFM values. The active nominal CPU
frequency is Ratio*100MHz.
Enables/Disables ME FW Downgrade function.
Read-only f ield.
Read-only f ield.
Sets or clears the Supervisor
Press "Enter" to specify a hint string for the Super visor Password.
Sets or clears the User Password.
Press "Enter" to specify a hint string for the User Password.
Specif ies the minimum password length.
Enables the user authentication prompt on the boot.
Specif ies whether to enable User-only suppor t for HDD or User and Master support.
Read-only f ield.
Specif ies and conf irms the HDD User Password.
Enables/Disables TPM support.
DESCRIPTION
DESCRIPTION
Password.
DESCRIPTION
User Guide
AM4024(E)
67