Table of Contents
Advertisement
KONTRON
25.5 Security Menu
Feature
Option
Supervisor Password is
Clear
Set
User Password is
Clear
Set
Set User Password *
Up to seven alphanumeric
characters
Set Supervisor
Up to seven alphanumeric
Password *
characters
Diskette access
User
Supervisor
Fixed disk boot sector
Normal
Write protected
Virus check reminder
Disabled
Daily
Weekly
Monthly
System backup
Disabled
reminder
Daily
Weekly
Monthly
Password on boot
Disabled
Enabled
Notes:
In the Option column, bold shows default settings.
(*)
Enabling Supervisor Password requires a password for entering Setup.
Passwords are not case sensitive.
User and Supervisor passwords are related. A User password is possible
only if a Supervisor password exists.
coolMONSTER/PM User's Guide
83
Description
Displays whether password is set.
Displays whether password is set.
Pressing <Enter> displays the dialog
box for entering the user password.
In related systems, this password
gives restricted access to setup.
Pressing <Enter> displays the dialog
box for entering the user password.
In related systems, this password
gives full access to setup.
Enabled requires supervisor
password to access floppy disk.
Write protect the boot sector on the
hard disk for virus protection.
Requires a password to format or
Fdisk the hard disk.
Displays a message during bootup
asking (Y/N) if you backed up the
system or scanned for viruses.
Message returns on each boot until
you respond with Y.
Daily displays the message on the
first boot of the day, Weekly on the
first boot after Sunday, and monthly
on the first boot of the month.
Displays a message during bootup
asking (Y/N) if you backed up the
system or scanned for viruses.
Message returns on each boot until
you respond with Y.
Daily displays the message on the
first boot of the day, Weekly on the
first boot after Sunday, and monthly
on the first boot of the month.
Enabled requires a password on
boot. Requires prior setting of the
supervisor password.
If supervisor password is set and this
option is disabled, BIOS assumes
user is booting.
Appendix B: BIOS Operation
25.6 Power Menu
In the BIOS Setup Utility, you can set up an Advance Power
Management system (APM 1.2) to reduce the amount of energy used
after specified periods of inactivity. The setup menu supports:
†
Full On State
†
Standby State with Partial Power Reduction
†
Suspend State with Full Power Reduction
In addition you can enable an ACPI 1.0 support in the BIOS setup
utility, if you intend to use an operating system supporting the
Advanced
Configuration
and
Power
logical reasons it is required to use an ATX power supply with
the ACPI feature.
The following states are supported from the system:
†
S0 (Working)
†
S1 (Sleeping with processor context maintained)
†
S5 (Soft off)
The state S2 (sleeping with processor context not maintained)
and S3 (Save to RAM) is not supported. The state S4 (Save to
Disk) is a matter of the used operating system.
ACPI Resume Events
25.6.1
The following events resume the system from S1:
†
Power button
†
PME#
†
PS/2 keyboard and mouse
†
USB keyboard and mouse activity
†
USB resume event
Appendix B: BIOS Operation
84
KONTRON
Management
Interface.
For
coolMONSTER/PM User's Guide
Advertisement
Table of Contents
