Table of Contents
Advertisement
ICDM-RX/TCP Installation and Configuration Guide
Loading Driver Configuration Files
5. If necessary, enter a file name or optionally, change the default file name and click Save.
6. Repeat the previous steps for each ICDM-RX/TCP for which you want to save the driver configuration.
8.6.2. Loading Driver Configuration Files
Use the following procedure to load the configuration file for device-level information for your ICDM-RX/TCP.
1. If necessary, open the Windows Drivers Management Console located under Pepperl+Fuchs
Comtrol>Windows Driver Management Console.
2. Depending on your operating system, you may need to click Yes to the Do you want to allow the following
program to make changes to this computer? User Account Control message.
3. In the left pane, highlight the ICDM-RX/TCP for which you want to load the device-level settings from the
configuration file.
4. Click Load Configuration.
5. Browse to the location of the configuration file that you want to load.
6. Highlight the configuration file and click Open. The configuration file loads in a few moments.
96
Advertisement
Table of Contents
Troubleshooting
