Changing Keys And Certificates - Pepperl+Fuchs ICDM-RX/TCP-DB9/RJ45-PM Installation And Configuration Manual

ICDM-RX/TCP Installation and Configuration Guide

Changing Keys and Certificates

6.5.2. Changing Keys and Certificates
Use the following steps to update security keys and certificates in the ICDM-RX/TCP. Refer to the help system
or Key and Certificate Management subsection on Page 70 for detailed information.
1. If necessary, enter the IP address of the ICDM-RX/TCP in the Address field of your web browser and press
the Enter key.
2. Click Network | Keys/Certs.
3. Click Browse to locate the key or certificate file, highlight the file, and click Open.
4. Click Upload.
5. Click Save, but changes will not take effect until the ICDM-RX/TCP is rebooted.
Note: The key or certificate notation changes from factory or none to User when the ICDM-RX/TCP is
secure.
You can reboot the ICDM-RX/TCP by clicking System | Reboot or use the PortVision DX reboot option.
70