ICDM-RX/TCP Installation and Configuration Guide
PortVision DX
5.2.2. PortVision DX
There are several ways to access the socket configuration page for the ICDM-RX/TCP using PortVision DX.
1. If necessary, start PortVision DX, right-click the ICDM-RX/TCP that you want to configure, and click
Webpage.
2. Follow Steps 3 through 3 from the previous procedure above (Web Browser).
5.3. SocketServer Versions
The SocketServer Overview discusses the that the default SocketServer web page is the same as the NS-Link
web page. If the NS-Link driver is not running (not installed or disabled), SocketServer loads when you open a
web browser session.
Note: The top illustration shows the web page before an NS-Link device driver installation and the bottom
illustration shows the web page after a device driver installation.
48