ICDM-RX/TCP Installation and Configuration Guide
Using Configuration Files
8.8. Using Configuration Files
This subsection discusses how to create (save) and load ICDM-RX/TCP configuration files. You may want to
create ICDM-RX/TCP configuration files for these reasons:
•
Save the ICDM-RX/TCP configuration settings so that you can load them on similar ICDM-RX/TCPs to
save configuration ICDM-RX/TCP
•
Save the ICDM-RX/TCP configuration settings because you need to remove a firmware version to install a
new firmware version and you want to reload the configuration settings into the new firmware.
8.8.1. Saving Configuration Files
Use this procedure to save configuration files.
1. Enter the IP address into your browser to access the web interface.
2. Click System | Configuration File.
3. Click the Save Configuration button.
4. Depending on your browser, may need to click save or direct it to a specific file location.
99