Table of Contents
Advertisement
ICDM-RX/TCP Installation and Configuration Guide
Configuring COM Port Properties for Windows
4.5. Configuring COM Port Properties for Windows
The following is a COM port properties configuration overview. Use the NS-Link Help system for detailed
configuration information.
1. Highlight the first port you want to configure.
2. Complete the screen appropriately for the serial device that you plan on connecting to the port and click the
Ok button.
a. Select the appropriate communications mode.
b. Enable the features that you want to use.
c. Optionally, click the RTS Toggle Options button:
•
If your communications application does not toggle
RTS when transmitting in RS-485 mode.
•
If you are using an external RS-232 to RS-485
converter, which is attached to a port that is
configured for RS-232.
d. Click the appropriate options for your environment.
e. Click OK to save the changes and return to the port
General tab.
3. If desired, click the Clone check box to set all of the ports on
this ICDM-RX/TCP to these characteristics.
4. Optionally, change the User-Friendly Port Name.
40
Advertisement
Table of Contents
Troubleshooting
