ICDM-RX/TCP Installation and Configuration Guide
Socket Mode Serial Port Testing
11.5. Socket Mode Serial Port Testing
This procedure illustrates using Putty, which is available in PortVision DX. Optionally, you can use any other
Winsock compatible application.
Note: The following procedure starts with resetting ICDM-RX/TCP to factory default values. You may want to
save the ICDM-RX/TCP socket configuration using PortVision DX - Saving a SocketServer
Configuration File on Page 93.
1. If necessary, install PortVision DX using Installing PortVision DX on Page 27 and scan the network to locate
the ICDM-RX/TCP that you want to test.
2. Right-click the ICDM-RX/TCP and click Webpage.
3. Click System | Restore Defaults.
4. Click the Port settings and Security settings, password, keys, and certificates options, and then the
Restore button.
Note: The ICDM-RX/TCP will reboot.
5. If necessary, re-open the web pages and click the port that you want to test.
141