Enabling Secure Data Mode - Pepperl+Fuchs ICDM-RX/TCP-DB9/RJ45-PM Installation And Configuration Manual

ICDM-RX/TCP Installation and Configuration Guide

Enabling Secure Data Mode

4.6. Enabling Secure Data Mode
In addition to enabling SSL Mode in the driver, you must Enable Secure Data Mode in the NS-Link web page.
Use the following procedure to implement the Enable Secure Data Mode option.
1. Access the NS-Link web page using one of these methods:
• Open your web browser, enter the IP address, and press Enter.
• Right-click the ICDM-RX/TCP in PortVision DX and click Webpage.
2. Click Network | Security.
3. Click Enable Secure Data Mode and Save.
4. Click Keys/Certs to configure your security key and certificate.
42