ICDM-RX/TCP Installation and Configuration Guide
Testing Ports Using Port Monitor (PMon2)
11.3. Testing Ports Using Port Monitor (PMon2)
You can use this subsection to test the ICDM-RX/TCP driver installation. If you need to install the device driver,
locate the latest driver from: https://www.pepperl-fuchs.com.
11.3.1.Overview
This procedure will check whether the ICDM-RX/TCP can:
•
Communicate through the Pepperl+Fuchs device driver
•
Determine if a port is open with an application
11.3.2.Testing Pepperl+Fuchs COM Ports With Port Monitor
If necessary, Installing PortVision DX on Page 27 to install PortVision DX, which contains Port Monitor.
1. Start PortVision DX from the Start menu, select Pepperl+Fuchs Comtrol > PortVision DX or click the
desktop shortcut.
2. Select Tools > Applications > Port Monitor (PMon2).
3. Click Add Ports using the icon or Tools > Add Ports,
130