Accessing Socket Configuration; Web Browser - Pepperl+Fuchs ICDM-RX/TCP-DB9/RJ45-PM Installation And Configuration Manual

ICDM-RX/TCP Installation and Configuration Guide

Accessing Socket Configuration

5.2. Accessing Socket Configuration
There are two ways to access the socket configuration pages. Use the method that fits your environment best.
•

Web Browser

• PortVision DX
5.2.1. Web Browser
To access the socket configuration web interface for the ICDM-RX/TCP, follow this procedure.
1. Start your web browser.
2. Enter the IP address of the ICDM-RX/TCP in the URL field.
Note: If you do not know the IP address, you can view and highlight the IP address in PortVision DX and
click the Webpage button.
3. If necessary, enter admin as the username, your password, and then click the Login button.
4. Click the Port menu.
5. Click the port number that you want to configure socket port settings (serial, TCP connection configuration,
and UDP connection configuration).
Note: Refer to the web page Help system, if you need information about configuring sockets or serial
tunneling, which contains detailed configuration procedures and descriptions for all fields.
2. After changing the appropriate settings for your environment, click Save.
3. Click the Network tab to access the following pages if you need to configure additional settings:
• Configuration page to change the network settings.
• Password page to configure a password for the ICDM-RX/TCP.
• Security page to enable ICDM-RX/TCP security.
46