ICDM-RX/TCP Installation and Configuration Guide
Using a Web Browser to Set Security Features
6.5. Using a Web Browser to Set Security Features
The follow procedures are discussed below:
•
Changing Security Configuration
•
Changing Keys and Certificates on Page 70
6.5.1. Changing Security Configuration
Use the following steps to change security settings in the ICDM-RX/TCP.
1. Enter the IP address of the ICDM-RX/TCP in the Address field of your web browser and press the Enter
key.
2. Click Network | Security.
3. Click the appropriate check boxes to enable or disable security for your environment.
Refer to the help system or Configure/Enable Security Features Overview on Page 62 for detailed
information.
4. After making changes, click Save.
69