Package Contents - IAI SW-4000TL-10GE User Manual

SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)
Item
Verified Performance
Temperature/Humidity
Storage
Temperature/Humidity
Vibration Resistance
Shock Resistance
Regulations
Dimensions
Weight
Notes:
Design and specifications are subject to change without notice.
Approximately 30 minutes of warm-up are required to achieve these specifications.
Caution: About the verified performance temperature
Make sure the following temperature conditions are met when operating the unit.
SW-4000TL-10GE: The camera's internal temperature sensor detects temperatures of
l
100°C or less during operation.
SW-4000TL-SFP: The camera's internal temperature sensor detects temperatures of
l
80°C or less during operation.
If the above temperature conditions are exceeded, take measures to dissipate heat according
to your installation environment and conditions.

Package Contents

Camera body (1)
l
Sensor protection cap (1)
l
Dear Customer (sheet) (1)
l
-5°C ~ +45°C (20 to 80%, non-condensing)
Note: It may change depending on the installation environment. Please refer to the Caution in this section.
-25°C ~ +60°C (20 to 80%, non-condensing)
10G (20 Hz~ 200 Hz X-Y-Z direction)
80G
CE (EN61000-6-2、 EN61000-6-3), RoHS/WEEE, FCC Part15 Class B
62mm x 62mm x 102.3mm (WHD; excluding mount and protrusions)
M42 mount: 340g (typ.)
F mount: 410g (typ.)
Specifications
- 100 -
Miscellaneous