Preparation; Step 1: Install The Software (First Time Only) - IAI SW-4000TL-10GE User Manual

SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)

Preparation

Read this section to learn how the camera connects to devices and accessories. The preparation
process is described below.

Step 1: Install the Software (First Time Only)

1
Install the software for configuring and controlling the camera (eBUS SDK for JAI) on the
l
computer.
Step 2: Connect Devices
2
Connect the lens, cable, AC adapter, computer, and other devices.
l
Step 3: Verify Camera Operation
3
Verify whether the camera is turned on and ready for use.
l
Step 4: Verify the Connection between the Camera and PC
4
Verify whether the camera is properly recognized via Control Tool.
l
Step 4: Configure Basic Settings for the Camera
5
Configure the Trigger and Exposure settings.
l
Step 6: Adjust the Image Quality
6
Adjust the Gain, White Balance and Black Level settings, and adjust the image quality.
l
Step 7: Save the Settings
7
Save the current setting configurations in user memory.
l
Step 1: Install the Software (First Time Only)
When using the camera for the first time, install the software for configuring and controlling the
camera (eBUS SDK for JAI) on the computer.
Note: When you install eBUS SDK for JAI, eBUS Player for JAI will also be installed.
1. Download the eBUS SDK for JAI from the JAI website
software/jai-software).
2. Install eBUS SDK for JAI on the computer.
(https://www.jai.com/support-
- 19 -
Preparation