Test Pattern Function - IAI SW-4000TL-10GE User Manual

SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)
Note on RGB (UserCustom)
This allows you to use user-configured 3x3 conversion tables to perform color space conversion.
Configuration 3x3 table
1. Specify one of the nine items that are the components to the 3×3 conversion table in
ColorMatrixValueSelector.
2. Specify a value from –2 to +2 in ColorMatrixValue.
See ColorTransformationControl

Test Pattern Function

Related Setting Items:
You can display the following test patterns (White, GreyPattern1(Ramp), GreyPattern2(Stripe),
ColorBar). Video output is not possible while a test pattern is being executed. This function is not
dependent on gain and offset values that have already been configured, and output is performed
in the following states.
Note: This function cannot be saved as the initial state of the camera.
for detailed information on the setting items.
ImageFormatControl
- 50 -
Main Functions