Variable Line Rate - IAI SW-4000TL-10GE User Manual

SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)

Variable Line Rate

Related Setting Items:
You can set the line rate to 1L or more. This function can be used to match the scanning speed of
the camera to the feeding speed of the object or to lengthen the accumulation time to increase
sensitivity.
Variable Range
Variable Unit
Supported Operation
Modes
Notes:
You can also save the setting, and have it applied whenever the power is subsequently
l
turned on, but this requires additional operations.
Switching and settings storage for this function is performed via serial communication.
l
The black level will change depending on the line rate, so be sure to readjust the black
l
level after changing the line rate or trigger period.
The maximum line rates for 1GigE, 2.5GigE, and 5GigE are shown below.
l
1GigE: 9KHz
l
2.5GigE: 24Khz
l
5GigE: 49Khz
l
AcquisitionControl
RGB8: 66 Hz* ~ 66 kHz
l
Note: *When taking a trigger signal from the outside, there is no limitation
on the minimum value.
0.1Hz
l
Exposure Mode = OFF / TriggerMode = Off
l
ExposureMode = Timed / TriggerMode = Off
l
- 47 -
Main Functions