SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)
Spatial Compensation
Related Setting Items:
Spatial compensation adjustment for trilinear cameras
This function corrects the spatial pixel differences individually for the R, G, and B lines captured
by the trilinear line sensor.
Two modes are available; Manual and Auto.
Configuring settings for SpatialCompensationMode: Manual
You can configure the number of pixels to correct individually for the R, G, and B lines.To do so,
configure the SpatialCompensationR, SpatialCompensationG, and SpatialCompensationB
values.
Configuring settings for SpatialCompensationMode: Auto
In this mode, the number of pixels to correct individually for the R, G, and B lines is calculated
automatically using the trigger interval at which the camera operates, the amount of movement in
pixels of the imaging subject within the sensor during a single trigger
(SpatialCompensationDistance), and the movement direction (Object Direction) signal of the
subject.
The object direction signal is used to obtain the direction of the imaging subject. The direction
signal from the rotary encoder, the I/O signal input of the camera, or the high/low control signal
from the software can be used as the object direction signal.
SpatialControl
- 55 -
Main Functions