SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)
To Use the Counter Function
Configure the settings as follows.
Eight counters are available. Specify a counter (Counter0 to Counter7), and configure the
settings.
Item
Counter 0 ~ 7
CounterEventSource
CounterEventActivation
Setting Value
Selectable Range
Counter 0 ~ 5
Counter0: Off, Line Trigger
Counter1: Off, Line Start
Counter2: Off, Exposure Start
Counter3: Off, Frame Trigger
Counter4: Off, Frame Start
Counter5: Off, Frame Transfer End
Counter0 ~ 4: Rising Edge
Counter5: Falling Edge
- 53 -
Main Functions
Description
Select the counter.
Select the Counter
Event signal for which to
read the count value.
When set to Off, the
counter operation will
stop (but will not be
reset).
Specify the timing at
which to count. This
setting is fixed.