Action Control Function - IAI SW-4000TL-10GE User Manual

SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)

Action Control Function

Related Setting Items:
How to use GigE Vision Action Commands
The Action Control Function is a function that executes the pre-configured action when the
camera receives action commands. Action commands can send both unicast and broadcast
messages and give instructions for actions to multiple cameras simultaneously by broadcasting
them. A camera that has this function can even give instructions for actions to different types of
multiple cameras. Although this function includes jitter and delays, it is useful for controlling
multiple cameras simultaneously.
Actions are performed when the following three conditions are met.
1. ActionDeviceKey set to the camera and ActionDeviceKey in the action command match.
2. ActionGroupKey set to the camera and ActionGroupKey in the action command match.
3. ActionGroupMask set to the camera and GroupMask in the action command perform AND
operation, and the result is not 0.
How to Configure
1. Specify ActionDeviceKey.
2. Then, specify two actions that can be configured on the camera.
a. Action1
1. Select 1 in ActionSelector.
2. Specify ActionGroupMask [ActionSelector].
3. Specify ActionGroupKey [ActionSelector].
b. Action2
1. Select 2 in ActionSelector.
2. Specify ActionGroupMask [ActionSelector].
3. Specify ActionGroupKey [ActionSelector].
3. Set triggers (AcquisitionStart, AcquisitionEnd, FrameStart, AcquisitionTransferStart) to
Action1 and Action2.
ActionControl
- 62 -
Main Functions