Counterandtimercontrol - IAI SW-4000TL-10GE User Manual

SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)

CounterAndTimerControl

Configure counter settings.
Note: This camera only supports counter functions
Related Topic: Counter and Timer Control Function
Counter and Timer Control
Item
CounterSelector
CounterEventSource
CounterEventActivation
CounterReset Source
Note: SW-4000TL-10GE only
CounterResetActivation
Note: SW-4000TL-10GE only
CounterReset
CounterValue
CounterStatus
Setting Range Default
Counter0 ~ 5 Counter0
- Off
Rising Edge
-
Falling Edge
0: Software
3: Line4 TTL In1
4: Line5 Opt In1 -
9: Line10 TTL In2
12: Line13 TTL In3
Rising Edge
Falling Edge
-
Level High
Level Low
- -
0 ~ 32bit max 0
-
- 78 -
Setting List (Feature Properties)
Description
Select the counter.
Assign the counter event signal for which you want to read
the count value to a dedicated counter, and read the value
Counter0: Off, Line Trigger
Counter1: Off, Line Start
Counter2: Off, Exposure Start
Counter3: Off, Frame Trigger
Counter4: Off, Frame Start
Counter5: Off, Frame Transfer End
Set the count timing. The setting value is fixed with the
following data
Counter0 ~ 4: Rising Edge
Counter5: Falling Edge
Specifies the source that resets the counter. This source
triggers and resets the counter.
Selects the timing for counter reset.
Reset the counter.
Display the count value.
Display the counter status.
CounterIdle
CounterActive
CounterOverflow