Action Control Example - IAI SW-4000TL-10GE User Manual

SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)

Action Control Example

Assume that the following settings have been pre-configured on the camera.
ActionDeviceKey : 0x00001001
l
ActionGroupMask[1] : 0x00000011
l
ActionGroupKey[1] : 0x00000001
l
ActionGroupMask[2] : 0x00000111
l
ActionGroupKey[2] : 0x00000002
l
When the camera receives action commands (ActionDeviceKey:0x00001001,
ActionGroupMask:0x00000011, ActionGroupKey: 0x00000002), Action2 is executed.
When the camera receives action commands (ActionDeviceKey:0x00001001,
ActionGroupMask:0x00000011, ActionGroupKey: 0x00000001), ActionDevice and
ActionGroupKey[1] match. However, the result of AND operation performed by ActionGroupMask
is 0. Therefore, in this case, neither Action1 nor Action2 is executed.
- 63 -
Main Functions