Table of Contents
Advertisement
SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)
④ AUX Connector (10-pin)
Connect the cable for DC IN / trigger IN here.
Camera side: Equivalent to Hirose Electronic 3260-10S3(55)
Cable side: Equivalent to Hirose Electronic 3240-10P-C(50)
⑤ RJ-45 Connector (SW-4000TL-10GE)
SW-4000TL-10GE supports the following Ethernet standards: 1000Base-T, 2.5GBase-T,
5GBase-T, 10GBase-T
Depending on the Ethernet standard to be used, the cable type and the maximum cable length
are limited. For details, refer to
A: LINK LED
Indicates the link status of the
network.
B: ACT LED
Indicates the network
communication status
Pin No.
Attribute
1
Out
2
Out
3
IN
4
5
GND
6
IN
7
8
9
GND
10
GND
"Step 2: Connect
A: LINK
B: ACT
Name
TTL OUT2
TTL OUT3
TTL_IN2
N.C
GND
TTL_IN3
N.C
N.C
GND
GND
Devices".
Light off
Network Link is not established.
Blinking
1000Base-T Link is established.
green -
(Interval 1sec)
slow
Blinking
2.5GBase-T Link or 5GBase-T Link is
green -
established. (Interval 200 msec)
fast
Lit green
10GBase-T Link is established.
Light off
No network communication
Blinking
(Tx) Network communication in
green
progress.
Blinking
(Rx) Network communication in
yellow
progress.
- 17 -
Parts Identification
Description
Line 8
Line 9
Line 10
Line 13
Advertisement
Table of Contents
