Table of Contents
Advertisement
Control System
This section includes:
•
•
•
•
The encoder can be remotely controlled from a host device such as a computer or Extron
control system. The controlling device communicates over the network via the NAV 1G port
(see
Secure Platform Device
As a Secure Platform Device (SPD), the encoder is a system-based device that
communicates with an Extron controller and supports 802.1X port-based Network Access
Control. When applied, 802.1X authentication requires that all devices are approved before
network access is granted.
The encoder communicates with compatible controllers such as Extron IPCP Pro and
IPL Pro series control products over a secure, encrypted channel. The encoder hosts secure
Serial and IR ports as well as a Secure Port Interface for SIS control of the encoder.
Toolbelt
The Extron Toolbelt utility is available on the Extron website. Toolbelt is a stand-alone
Windows application for the management of control systems. Toolbelt can automatically
discover Pro Series controllers and devices and NAV devices on a network (see the Toolbelt
Help file). You also can manually add devices, using the known IP addresses. Once you log
in to a NAV device, such as a NAVigator or NAV E 101, you can perform tasks such as:
•
•
•
•
•
•
•
•
Secure Platform Device
Toolbelt
Global Configurator Plus and Professional
Global Scripter
on page 7).
G
Launch the embedded encoder HTML page after discovery.
View the device and system information.
View and edit network information.
View and set SSL certifications.
Use utilities such as Ping, Reset, and Reboot.
Configure 802.1X security settings.
View 802.1X status logs.
Update the firmware to a selected device or group of devices.
NAV E 511 Encoder • Control System
65
Advertisement
Table of Contents
