Extron electronics NAV E 511 User Manual page 40

On Screen Display (OSD) pane
This pane shows the options for the OSD and screen saver on the Loop Thru (see
page 6) and streamed outputs. If you change any setting, either directly or by clicking RESET
(see figure 24, ), the SAVE button (
7
CANCEL ( ) to abandon the changes. Clicking either button closes the dialog box.
6
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
Figure 24. OSD Configuration Pane
OSD Type — Click the drop-down list to select among the
1
OSD options for display (see
on-screen displays).
• Input OSD — Input connection details that can alert users
of an input change
• Status OSD — General encoder details
• Custom — User specified to indicate information pertinent
to the application, such as source or security
• Disabled — No OSD
NOTE: When Input
appears below OSD Type
OSD Location (Available only when Custom is selected [
2
Click the drop-down list to select among the OSD location
options.
) becomes selectable. Click SAVE to take change or
5
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
figure 25 on page 32 for typical
Status OSD, or Custom is selected, OSD
OSD,
(see 3) on page 33).
NAV E 511 Encoder • HTML Operation
on
B
Duration
]) —
1
32