Ties Page - Extron electronics NAV E 511 User Manual

Ties Page

Access the Ties page (see figure 26) by clicking the link on the left side of the browser (
The browser displays the Ties panel (
and make AES67 ties and USB ties.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Figure 26.
The Ties page consists of two panes, Current Input (
that display the status of input and endpoints and tabs (
shown.
NOTES:
Current Input pane
The Current Input pane displays the input number and name of the encoder.
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Ties Page
• Your tab display may differ from figure 26. The AES67 tab is present only when
an Extron AES67-capable device, such as a DMP 128 ProDSP Digital Matrix
Processor, is tied into the NAV system. See the user guide for the applicable device
to configure that device and also the Dante documentation.
•
AV ties are read-only on this page.
• You can make and break AES67 and USB ties on this page.
• You can make and break ALL ties from the embedded HTML pages of a NAVigator
or decoder (see the NAVigator User Guide or the applicable decoder user guide,
available at www.extron.com, and the embedded HTML tie page for those
devices).
), which allows you to display AV ties and display
2
A A A A A A A A A A A A A A A A A A
) and Available Outputs (
3
) that allow you to tailor the ties
5
NAV E 511 Encoder • HTML Operation
).
1
)
4
34