Extron electronics NAV E 511 User Manual page 65

NOTE: IP Address, Subnet, Gateway, DNS Server, and DNS Suffix are not editable
when is on.
DHCP
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
A A A A A A A A A A A A A A A A A A
B B B B B B B B B B B B B B B B B B
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
DHCP On
Figure 59. Editable Network Connection Pane
DHCP — Click to toggle DHCP on and off. When DHCP is enabled, the endpoint
1
automatically receives network configuration parameters from a DHCP server. If no
DHCP server is available, the endpoint remains on Link local IP (see
IP Address, Subnet, and Gateway — Click in these fields and type in values to enter
2
the appropriate connection values for your encoder.
DNS (Domain Name System) Server — Click in this field and type in the name of the
3
domain name server.
DNS suffix — Click in this field and type the valid suffix of the domain name server.
4
Ethernet Extension — Click to toggle the rear panel Extension port (see
5
on page 6) on and off.
SAVE and CANCEL buttons — Click SAVE to take Network Connection changes or
6
CANCEL to abandon them. Clicking either button closes the editable pane.
NOTES:
• Link Local ( ) — DHCP is on by default. When a DHCP server is not
A
accessible, the Link local IP
169.254.254.255, is assigned to the endpoint when no other address assignment
methods are available.
• MAC Address ( ) — A unique read-only identifier for network connected devices.
B
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
A A A A A A A A A A A A A A A A A A
B B B B B B B B B B B B B B B B B B
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
DHCP Off
Address, an address in the range of 169.254.1.0 to
NAV E 511 Encoder • HTML Operation
).
A
figure 2,
H
57