Extron electronics NAV E 511 User Manual page 62

USB page
The USB selection on the General Settings page (see
only pane (see figure 55) that shows the status of the USB 2.0 port (see
port can be turned on and off and it can be configured by clicking the EDIT button (
editable version of the selection opens (see figure 56).
*
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
* If the endpoint is set to Host mode only.
Figure 55. USB Selection
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
*
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
* If the endpoint is set to Host mode only.
Figure 56. Editable USB Selection
USB Port — Click to toggle the port on and off.
1
NOTE: If you turn the USB port off, the endpoint does not appear on the USB Ties
page.
Mode — Click the drop-down list to select between Device and Host.
2
NOTES:
• Host mode allows a host device such as a PC to be connected or accepted to
that endpoint.
• Device mode allows devices to be connected or accepted to that endpoint.
• You can only tie a USB host to a USB device for proper system operation.
• Do not connect a host to an endpoint that is in USB device mode.
figure 46 on page 48) opens a read-
F
NAV E 511 Encoder • HTML Operation
on page 7). The
). An
1
54