Control System; Toolbelt - Extron electronics NAV E 101 DTP User Manual

Control System

This section includes:
•
•
•
•
The encoder can be remotely controlled from a host device such as a computer or Extron
control system. The controlling device communicates over the network via the NAV 1G port
(see
Secure Platform Device
As a Secure Platform Device (SPD), the encoder is a system-based device that
communicates with an Extron controller and supports 802.1x port-based Network Access
Control. When applied, 802.1x authentication requires that all devices are approved before
network access is granted.
The encoder communicates with compatible controllers such as Extron IPCP Pro and
IPL Pro series control products over a secure, encrypted channel. The encoder hosts
secure Serial and IR ports over DTP as well as a Secure Port Interface for SIS control of the
encoder.

Toolbelt

The Extron Toolbelt utility is available on the Extron website. Toolbelt is a stand-alone
Windows
discover Pro Series controllers and devices and NAV devices on a network (see the Toolbelt
Help file). You also can manually add devices, using the known IP addresses. Once you log
in to a NAV device, such as a NAVigator or NAV E 101, you can perform tasks such as:
•
•
•
•
•
•
•
•
Secure Platform Device
Toolbelt
Global Configurator Plus and Professional
Global Scripter
on page 6).
C
application for the management of control systems. Toolbelt can automatically
®
Launch the embedded encoder HTML page after discovery
View the device and system information
View and edit network information
View and set SSL certifications
Use utilities such as Ping, Reset, and Reboot
Configure 802.1x security settings
View 802.1x status logs
Update the firmware to a selected device or group of devices
NAV E 101 DTP Encoder • Control System 55