evertz 570J2K-HW-X19 User Manual
  1. Manuals
  2. Brands
  3. evertz Manuals
  4. Media Converter
  5. 570J2K-HW-X19
  6. User manual

evertz 570J2K-HW-X19 User Manual

Multi channel j2k encoder-decoder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Multi Channel J2K Encoder-Decoder
© Copyright 2017
EVERTZ MICROSYSTEMS LTD.
5288 John Lucas Drive
Burlington, Ontario
Canada L7L 5Z9
Phone:
+1 905-335-3700
Sales:
sales@evertz.com
Tech Support: service@evertz.com
Web Page:
http://www.evertz.com
Version 1.0, February 2017
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of
purchasers of the 570J2K product. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the operation of the
570J2K product. Due to on going research and development, features and specifications in this manual are subject to change without notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd. Copies of
this manual can be ordered from your Evertz dealer or from Evertz Microsystems
570J2K-HW-X19
User Manual
Fax: +1 905-335-3573
Fax: +1 905-335-7571
.

Advertisement

Table of Contents
loading

Related Manuals for evertz 570J2K-HW-X19

Summary of Contents for evertz 570J2K-HW-X19

  • Page 1 Version 1.0, February 2017 The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of purchasers of the 570J2K product. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the operation of the 570J2K product.
  • Page 2 This page left intentionally blank...
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “Dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (Servicing) instructions in the literature accompanying the product.
  • Page 4 WARNING Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s authority to operate the equipment. Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables...

  • Page 5: Table Of Contents

    3.8. PHYSICAL ..........................7 3.9. ENCLOSURES ........................8 3.10. ORDERING INFORMATION ....................8 570J2K-HW-X19 APPLICATION BASED FIRMWARE ..............9 570J2K-HW-X19 APP A “ENCODER” WEB INTERFACE ............11 5.1. SYSTEM ..........................13 5.1.1. System ........................13 5.1.2. Control Port Configuration ..................13 5.1.3.
  • Page 6 5.8.1. System Monitoring Control ..................25 5.8.2. System Notify ......................25 5.9. INPUT NOTIFY ........................26 5.9.1. Encoder Input Notification ..................26 570J2K-HW-X19 APP B “DECODER” WEB INTERFACE ............27 6.1. SYSTEM ..........................29 6.1.1. System ........................29 6.1.2. Control Port Configuration ..................29 6.1.3.
  • Page 7 570J2K-HW-X19 Multi channel J2K Encoder-Decoder 6.6.5. ARP Control ......................38 6.7. DECODER CONTROL ......................38 6.7.1. Rx Input Monitor ...................... 39 6.7.2. Decoder Input Program Control ................39 6.7.3. Manual PID Control ....................40 6.7.4. MPPM Control ......................42 6.8. IP INPUT MONITOR ......................43 6.8.1.
  • Page 8 Multi channel J2K Encoder-Decoder Figures Figure 1-1 : 570J2K-HW-X19 Block Diagram ....................2 Figure 2-1 : 570J2K-HW-X19 Rear Plate and Front Plate Layout..............3 Figure 2-2 : 570FC Proxy Address........................5 Figure 5-1 : WebEASY - Login Menu ......................11 ®...
  • Page 9 Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.
  • Page 10 570J2K-HW-X19 Multi channel J2K Encoder-Decoder This page left intentionally blank Page - vi Revision 1.0...

  • Page 11: Overview

    The exceptional density of the 570J2K-HW-X19 supports up to 12 channels of 3G, HD/SDI, SD/SDI or up to 3 channels of UHD JPEG2000 encoding. The 570J2K-HW-X19 will support up to 9 channels of 3G, HD/SDI, SD/SDI JPEG2000 or 2 channels of UHD JPEG2000 decoding.

  • Page 12: Figure 1-1 : 570J2K-Hw-X19 Block Diagram

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder Figure 1-1 : 570J2K-HW-X19 Block Diagram Page - 2 Revision 1.0...

  • Page 13: Getting Started

    Multi channel J2K Encoder-Decoder GETTING STARTED The 570J2K-HW-X19 modules come with a companion rear plate and occupy two slots in 570FR. Refer to Figure 2-1 for 570J2K-HW-X19 Rear and Front plate layout. Figure 2-1 : 570J2K-HW-X19 Rear Plate and Front Plate Layout.

  • Page 14: Rear Plate

    1-12 are used for the encoder input sources. When 570J2K-HW-X19 is being used as a decoder, mini din 1-9 are used for decoder SDI outputs. The front plate of 570J2K-HW-X19 has 12 available SFP slots. These SFP slots can be populated with SFP10G-TR13-A.

  • Page 15: Hardware Installation

    2.4.1 CONNECTION VIA FC PROXY The control of the 570J2K-HW-X19 can be done through FC Proxy. To configure a FC Proxy address for the 570J2K-HW-X19, log into the 570FC webpage using “root” and “evertz” for the username and password respectively.
  • Page 16 570J2K-HW-X19 Multi channel J2K Encoder-Decoder This page left intentionally blank Page - 6 Revision 1.0...

  • Page 17: Specifications

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder SPECIFICATIONS 3.1. SERIAL DIGITAL VIDEO Standards: • SMPTE 424M (3Gb/s) • SMPTE 292M (1.5Gb/s) • SMPTE 259M (270Mb/s) • SMPTE 2022-6 3.2. SERIAL VIEDO INPUTS Number of Inputs: 12 SDI Connector 3.3. IP INPUT Number of Inputs...

  • Page 18: Enclosures

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 3.9. ENCLOSURES 570FR 3RU chassis S570FR 1RU chassis 3.10. ORDERING INFORMATION 570J2K-HW-X19 Enhanced logic capacity 570FR hardware module acting as a bulk J2K encoder/decoder (encoder licenses sold separately), 12 J2K Encodes/ 9 J2K Decodes and up to 4x10GE interfaces using SFP+ cages (SFPs sold...

  • Page 19: 0J2K-Hw-X19 Application Based Firmware

    570J2K-HW-X19 to function as an encoder, supporting up to 12 J2K encodes. App B is the decoder application that will allow the 570J2K-HW-X19 to function as a decoder, supporting up to 9 J2K decodes. The manual will first focus on App A related controls and configurations.
  • Page 20 570J2K-HW-X19 Multi channel J2K Encoder-Decoder This page left intentionally blank Page - 10 Revision 1.0...

  • Page 21: 0J2K-Hw-X19 App A "Encoder" Web Interface

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 570J2K-HW-X19 APP A “ENCODER” WEB INTERFACE The 570J2K-HW-X19 series of products are controlled using Web Interface. WebEasy operates using Ethernet and SNMP control protocols. Login After the card has been installed and configured with the required network addresses, it can be completely configured using the web interface.

  • Page 22: Figure 5-2 : 570J2K-Hw-X19 Main Menu

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder Figure 5-2 : 570J2K-HW-X19 Main Menu Page - 12 Revision 1.0...

  • Page 23: System

    Netmask: This Parameter allows the user to set the Netmask for control port. Gateway: This parameter allows the user to set the Gateway for control port. Please note the control port is only used when the 570J2K-HW-X19 is used in the S570FR. 5.1.3. Data Port Configuration IP Address: This parameter allows the user to set the IP address for data port.

  • Page 24: Data Port Monitor

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder Gateway: This parameter allows the user to set the Gateway for data port. Mac Address: This parameter reflects the MAC Address of the data port. Figure 5-4 : WebEASY - System Tab (Part 2) ®...

  • Page 25: Temperature Monitor

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder Figure 5-5 : WebEASY - System Tab (Part 3) ® 5.1.5. Temperature Monitor Temperature: This field monitors the current temperature of module. 5.1.6. Card Control Load Factory Config: This control is used to load factory configuration to each encoder.

  • Page 26: Product Features

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 5.2. PRODUCT FEATURES Figure 5-6 : WebEASY - Product Features Tab ® 5.2.1. License Control A product license channel key can be provided to enable J2K encode/decode functionality. It is applied using this control and unlocks feature functionality.

  • Page 27: Sdi Input Control

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 5.3. SDI INPUT CONTROL Figure 5-7 : WebEASY - SDI Input Control Tab ® 5.3.1. Input Status Input Select: This parameter configures the Max Link Rate for the specified channel path. It is used only when the channel paths are set for Encapsulation.

  • Page 28: Ip Output Control

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 5.4. IP OUTPUT CONTROL Figure 5-8 : WebEASY - IP Output Control Tab ® 5.4.1. Configuration Processing Mode: This dropdown menu allows the user to select the processing mode which can be Encode or Disable.

  • Page 29: Ip Output Advanced Control

    AES Encryption on the encoder output. 5.5. IP INPUT CONTROL The IP Input Control for the 570J2K-HW-X19 reflects the controls related to SMPTE 2022-6 Input IP configuration. Figure 5-9 : WebEASY - IP Input Control Tab (Part 1) ®...

  • Page 30: Input Control

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 5.5.1. Input Control Input Stream Alias: This field allows the user to define the input stream alias name. 5.5.2. Input Port Control Input IP Address: This parameter allows the user to define input IP address / multicast address they want to receive.

  • Page 31: Ip Input Advanced Control

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 5.5.4. IP Input Advanced Control AES Decryption: Reserved for future use. 5.5.5. ARP Control Gratuitous ARP: This dropdown menu allows the user to enable/disable the Gratuitous ARP. Gratuitous ARP Address: This control allows the user to set the IP address used for Gratuitous ARP.

  • Page 32: Encoder Audio Output Control

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder Latency Mode: This dropdown menu allows the user to select the latency mode which can be Standard or Ultra low. Color Specification: This dropdown menu allows the user to specify the color space of the input video.

  • Page 33: Program Description Control

    5.6.4. Compliance Compliance Mode: This dropdown menu allows the user to select the encoder compliance mode. The available options include Normal, TR01 and Evertz Legacy. 5.6.5. Encoder Control Encoder Restart: This control allows the user to restart each individual encoder.

  • Page 34: Ip Input Monitor

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder Encoder Up Time: This parameter displays the encoder up time, reflecting how long has the encoder been running for. 5.7. IP INPUT MONITOR Figure 5-13 : WebEASY - IP Input Monitor Tab ® 5.7.1. Input Stream Stream Type: This parameter displays the type of input stream which could be multicast or unicast.

  • Page 35: System Notify

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 5.8. SYSTEM NOTIFY Figure 5-14 : WebEASY - System Notify Tab ® 5.8.1. System Monitoring Control Temperature Warning Threshold: This control allows the user to set the temperature threshold. If the temperature exceeds the configured temperature threshold, the temperate status will change to active.

  • Page 36: Input Notify

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder Port Link SFP3 Trap: This control allows the user to enable trap receiving when the port 3 is down and an associated correction trap when the port is up. Port Link Status SFP4: This status highlights Data 4 port status. If the port is up, the status will be inactive / green.

  • Page 37: 0J2K-Hw-X19 App B "Decoder" Web Interface

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 570J2K-HW-X19 APP B “DECODER” WEB INTERFACE The 570J2K-HW-X19 series of products are controlled using Web Interface. WebEasy operates using Ethernet and SNMP control protocols. Login After the card has been installed and configured with the required network addresses for the control port, it can be completely configured using the web interface.

  • Page 38: Figure 6-2 : 570J2K-Hw-X19 Main Menu

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder Figure 6-2 : 570J2K-HW-X19 Main Menu Page - 28 Revision 1.0...

  • Page 39: System

    Netmask: This Parameter allows the user to set the Netmask for control port. Gateway: This parameter allows the user to set the Gateway for control port. Please note the control port is only used when the 570J2K-HW-X19 is used in the S570FR. 6.1.3. Data Port Configuration IP Address: This parameter allows the user to set the IP address for data port.

  • Page 40: Data Port Monitor

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder Netmask: This parameter allows the user to set the Netmask for data port. Gateway: This parameter allows the user to set the Gateway for data port. Mac Address: This parameter reflects the MAC Address of the data port.

  • Page 41: Temperature Monitor

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder Tx Oversized Frame Count: This parameter displays the received Tx oversized frames on this Ethernet ports. Clear Status: This button allows the user to reset the Ethernet monitor statistics. Figure 6-5 : WebEASY - System Tab (Part 3) ®...

  • Page 42: Product Features

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 6.2. PRODUCT FEATURES Figure 6-6 : WebEASY - Product Features Tab ® 6.2.1. License Control A product license channel key can be provided to enable J2K encode/decode functionality. It is applied using this control and unlocks feature functionality.

  • Page 43: Sdi Input Control

    ® The SDI Input Control on the decoder is used to configure the Max Link Rate for the SMPTE2022-6 output provided from the 570J2K-HW-X19. 6.3.1. Input Status Input Select: This parameter configures the Max Link Rate for the specified channel path. It is used only when the channel paths are set for Encapsulation.

  • Page 44: Sdi Output Control

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 6.4. SDI OUTPUT CONTROL Figure 6-8 : WebEASY - SDI Output Control Tab ® 6.4.1. Output Control Loss of Video: This parameter configures the Decoder Output functionality when input is missing on the decoder. The applicable options include a continuous black output or freeze on the last valid video frame received.

  • Page 45: Phase Adjustment

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 6.4.3. Phase Adjustment For Output 1 to 9: H Phase: This control allows the user to set the horizontal phase, default is 0. V Phase: This control allows the user to set the vertical phase, default is 1.

  • Page 46: Configuration

    6.5.3. IP Output Advanced Control AES Encryption: Reserved for future use. 6.6. IP INPUT CONTROL The IP Input Control for the 570J2K-HW-X19 reflects the controls related to JPEG 2000 Input IP configuration. Figure 6-10 : WebEASY - IP Input Control Tab ®...

  • Page 47: Input Control

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 6.6.1. Input Control Input Stream Alias: This field allows the user to define the input stream alias name. 6.6.2. Input Port Control Input IP Address: This parameter allows the user to define input IP address / multicast address they want to receive.

  • Page 48: Input Sfp Port Selection

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 6.6.3. Input SFP Port Selection Main SFP Port Selection: This dropdown menu allows the user to assign an Input Data Port as the Main Data Port. The main data port will accept traffic and provide it to the decoder core.

  • Page 49: Rx Input Monitor

    This monitor returns the program name read from the Evertz private service descriptor (79) from the PMT. PSD Network ID: This monitor returns the network id read from the Evertz private service descriptor (79) from the PMT. 6.7.2. Decoder Input Program Control Program Tuning Mode: This parameter allows user to select the program tuning mode of the decoder.

  • Page 50: Manual Pid Control

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 6.7.3. Manual PID Control 0, 1 and 8191 are reserved PID in MPEG so these are not included. NOTE: Video PID Select: This control allows user to configure the Video PID which decoder will decode. This control is only applicable when the programTuningMode is set to manualPidSelect.

  • Page 51: Figure 6-13 : Webeasy - Decoder Control Tab (Part 2)

    - Decoder Control Tab (Part 2) ® Jitter Tolerance: Please consult Evertz Service before configuring this control. When the network jitter is in access of 30ms, Jitter tolerance adds further resilience to the input detection. Codec Latency: Reserved for future use.

  • Page 52: Mppm Control

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder Figure 6-14 : WebEASY - Decoder Control Tab (Part 3) ® 6.7.4. MPPM Control Link Select: The link select control allows the user to configure the decoder link to Auto Packet Merge, Main, Backup or Fail Over.

  • Page 53: Ip Input Monitor

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder Playout Delay: The playout delay adds delay to account for skew / delta between the main path and backup path and is also used to account for jitter along the path. The playout delay is user configurable from 0 to 1000ms.

  • Page 54: Input Stream

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 6.8.1. Input Stream Stream Type: This parameter displays the type of input stream which could be multicast or unicast. Protocol Status: This parameter reflects the input protocol. It will reflect unknown, UDP or RTP. AES Encryption Detected: This parameter displays if the stream has AES Encryption or not.

  • Page 55: Decoder Program Monitor

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder 6.9. DECODER PROGRAM MONITOR Figure 6-16 : WebEASY - Decoder Program Monitor Tab ® 6.9.1. Rx Program Monitor For Decoder (1-9): Program Num In TS: This parameter highlights the program number for the encoded transport stream.

  • Page 56: System Notify

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder Video Frame Rate: This monitor returns the incoming video frame rate Video Resolution: This control returns the Resolution of the video Video Profile And Level: This monitor returns the profile and level of the video read from video PES.

  • Page 57: Decoder Notify

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder Port Link SFP2 Trap: This control allows the user to enable trap receiving when the port 2 is down and an associated correction trap when the port is up. Port Link Status SFP3: This status highlights Data 3 port status. If the port is up, the status will be inactive / green.
  • Page 58 570J2K-HW-X19 Multi channel J2K Encoder-Decoder This page left intentionally blank Page - 48 Revision 1.0...

  • Page 59: Upgrade Procedures

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder UPGRADE PROCEDURES 7.1. FIRMWARE UPGRADE Using the WebEASY on a web interface is the fasted and recommended way to load the firmware onto ® the 570J2K modules. On the top of the web page for the 570J2K modules, there is a button labelled Upgrade. The Upgrade tab is used to check current firmware version and upload the latest firmware (Figure 7-1).

  • Page 60: Figure 7-3 : Webeasy - Firmware Upgrade Menu

    570J2K-HW-X19 Multi channel J2K Encoder-Decoder Figure 7-3 : WebEASY - Firmware Upgrade Menu ® Page - 50 Revision 1.0...

Table of Contents