Connecting The 5010-Sie To The 7225 Converter - evertz 5010 SIE Instruction Manual

5010-SIE END
9 PIN MALE "D"
DESCRIPTION
INSTALLATION
SERIAL I/O: A 9 pin female 'D' connector for connection to the 5010-SIE
Source ID Encoders
TRANSPORT STATUS:
connection to tallies from the VTR. Each input has an internal
47 K ohm pull-up to +5 volts.
LTC CONNECTION 1/4 " Stereo phone jack for connection if incoming
LTC from the VTR. Connect the balanced LTC from the VTR to
the Tip and Ring connections and the ground to the Sleeve.
POWER 12V DC Power input from power adaptor

2.6.2. Connecting The 5010-SIE To The 7225 Converter

The wiring diagram below can be used to make an appropriate cable.
PIN
Model 5010-SIE Source ID Encoder Manual
Pin Description
1 not used
2 not used
3 do not connect
4 not used
5 RS-232 Receive
6 Signal Ground
7 not used
8 RS 232 Transmit
9 not used
A 15 pin female high density 'D' connector for
Pin Description
1 Machine Select 1
2 Machine Select 2
3 Machine Select 3
4 Stop
5 Play
6 Fast Forward
7 Rewind
8 Record
9 Edit
10 Standby
11 Ground
12 Pause
13 Remote
14 Eject
15 Spare
7225 END
25 PIN MALE "D" TYPE
PIN DESCRIPTION
Page 2-6