evertz 5010 SIE Instruction Manual page 36

%
SRC ID MODE
5 SRC ID
9 SRC ID
5 SRC ID+STS
TIME 5 SRC ID
TIME 9 SRC ID
TIME 5 SRC ID+STS
OPERATING INSTRUCTIONS
To enter the on screen programming menus, press the SETUP key. The
character generator will show the last format screen that was used with the
currently selected item highlighted. The two horizontal arrow keys (!, ")
allow you to move horizontally to another drop down menu when the sub
menu is hidden. Using these two keys you can quickly scan the entire
menu system for the item you wish to change.
The two vertical arrow keys (#, $) allow you to move vertically within the
drop down menus. When you have selected the desired menu item, press
the SELECT key to reveal the sub menu choices for that item. Use the two
vertical arrow keys (#, $) to move vertically within the sub menu. When
you have selected the desired sub menu choice press the SELECT key to
hide the sub-menu and return to the drop down menu.
When you have made all the desired changes, press the SETUP key to
return to the normal display mode.
Changes made using the SETUP menu are only activated when you exit the
SETUP menu and return to normal display mode.
The GENERATOR drop down menu is used to program various generator
modes Source ID Mode, VITC Keyer On/Off, VITC Generator Line
numbers, etc. The VCG drop down menu is used to program the size and
style of the character generator and whether the time code frames will be
displayed or not (See section 3.5). The CONFIG drop down menu is used
to program various hardware related items such as display brightness,
horizontal character size, etc., and is also used to reset the 5010-SIE to its
factory defaults. (See section 3.5).
To aid in finding the descriptions of the various menu items in sections 3.4
to 3.6, the drop down menu items and its sub menu items are shown in the
margin of the manual, next to the description as shown.
Model 5010-SIE Source ID Encoder Manual
Page 3-6