5.9.
GPI PROGRAMMING
Selecting either "Program GPI" menu items, takes you to a screen dedicated to configuring the actions
associated with that GPI.
Any or all of the following features may be enabled. Note, however, that you can not blink the SID display
if it enabled to go off when the GPI goes active.
5.9.1. Message Associated with GPI
PROGRAM GPI
MESSAGE
GPI#1:
RECORD
GPI#2:
REPLAY
5.9.2. Enable Message Window Associated with GPI
PROGRAM GPI
MESSAGE
WINDOW
ENABLE,
DISABLE
5.9.3. Blink SID or Message Window with Active GPI
PROGRAM GPI
BLINK MSG/SID
DISABLE,
ENABLE
5.9.4. Turn Off Text with Active GPI
PROGRAM GPI
TEXT OFF
DISABLE,
ENABLE
Message to display when GPI goes active
This is the message associated with the associated GPI. The text of the
message can be changed. See the section on "Changing text fields".
Enable message window when GPI goes active
If enabled, the above message will be displayed when the associated
GPI goes active.
Enable message or SID blinking when GPI goes active
If the above GPI message is enabled to go on, it can also be blinked
when the GPI goes active. If the above message is NOT enabled to go
on, the SID window will be blinked (if there is a SID message to display).
Also, the "Missing or simulated SID" message will blink if that mode is
enabled.
Turn off text when GPI goes active
If this "all text off" feature is enabled, all OSD text, EXCEPT the GPI
message windows, will be turned off when the GPI goes active. If any of
the GPI messages are enabled to come on, the message will come on as
the other text goes off. This control will act on both the SDI output and
the composite output.
Revision 0.3
7700SID(-AM) Source Identification Decoder
7700 MultiFrame Manual
7700SID(-AM)-23