Gen Lock Connections; Parallel Remote Control Connections; Power Connections - evertz 5010 SIE Instruction Manual

INSTALLATION
VIDEO CHAR GEN OUTPUT:
VIDEO CHAR GEN INPUT video with characters inserted.
This output is also used to display the on screen
programming menu and is normally connected to a video
monitor.

2.1.3. Gen Lock Connections

REF VIDEO IN:
the 5010-SIE's generator.

2.1.4. Parallel Remote Control Connections

PARALLEL: A 9 pin female 'D' connector used for parallel remote control
inputs.
Pin Description
1 Ground
2 VCG Keyer On/Off (Characters toggled On or Off each
time this input grounded)
3 ON AIR VCG Disable (Characters turned off when this
input grounded)
4 not used
5 reserved - do not connect
6 not used
7 not used
8 not used
9 reserved - do not connect
SERIAL: A 9 pin female 'D' connector for connection to the RS-232
connector on the D3 video recorder / or the 7225 time
code/status converter used with the analog tape machines.
Pin Description
1 Ground
2 not used
3 not used
4 Receive Common
5 RS-232 Transmit
6 Transmit Common
7 not used
8 RS-232 Receive
9 Ground

2.1.5. Power Connections

LINE: The model 5010-SIE may be set for either 115v/60 Hz or
230v/50 Hz AC operation.
accessible on the rear panel.
contains an integral slow blow fuse (and a spare one).
Model 5010-SIE Source ID Encoder Manual
A BNC connector which outputs the
A BNC loop used to provide a gen-lock reference for
The voltage selector switch is
The line voltage connector
Page 2-2