Table of Contents
Advertisement
4.
TECHNICAL DESCRIPTION
4.1.
OVERVIEW
4.2.
JUMPERS AND SWITCHES
Switch
Name
1
Not used
2
Not used
3
Not used
4
Not used
5
Not Used
6
Factory Reset
7
Diagnostics
8
Not used
TECHNICAL DESCRIPTION
The model 5010-SIE Source ID Encoder combines the latest LSI
technology with sophisticated microcontroller firmware to provide a
powerful, flexible system. A 16 digit alphanumeric display can be quickly
delegated to show the required data.
The character inserter provides an on screen programming menu system,
which is used to configure the various operating modes. The use of drop
down menus and dedicated programming keys, allows the model 5010-SIE
to be conveniently configured for particular customer requirements.
Figure 4-2 shows the location and function of the switches and jumpers
inside the model 5010-SIE. The jumper positions marked in bold face type
are the default settings.
4.2.1. DIP Switch Functions
The main circuit board of the model 5010-SIE contains an 8 position DIP
switch which is used to invoke various diagnostic and calibration functions.
The functions of each switch are described below.
Normal
Function when Open
Open
Open
Open
Open
Open
Open
none
Open
none
Open
Figure 4-1: DIP Switch Functions
Model 5010-SIE Source ID Encoder Manual
Function when Closed
Resets 5010-SIE to factory defaults on
power up
Enters diagnostics mode on power up
Page 4-1
Advertisement
Chapters
Table of Contents
