evertz 5010 SIE Instruction Manual page 8

GEN SRC ID MODE
Mod 5 id
Mod 9 id
Mod 5 id+sts
Mod tim 5 id
Mod tim 9 id
Mod tim 5 id+sts
Mod tim 9 id+sts
Mod tim lvs+sts
GEN VITC KEYER
Gvitc keyer off
Gvitc keyer on
GEN VITC LINES
Gvitc line1 = 10
Gvitc line2 = 20
GEN RDR MODE
Vtr rdr mod ltc
Vtr rdr mod vitc
Vtr rdr mod auto
3.4.1 Configuring the Generator Operating Modes
The 5010-SIE encodes source ID information in a new extended 9 char source id format when it is in
the LVS mode. In this mode scene number and control information is encoded in the user bits in
addition to the normal 9 char source Id and status.
A new item has been added to the SRC ID MODE menu item to put the 5010-SIE into LVS mode.
TIME LVS SID + STS Operates the 5010-SIE in LVS mode. In this mode the serial port is automatically
configured to the correct protocol to receive LVS and status information from the Profile Disk
Recorder.
generator. The source ID, status and LVS information is encoded into the user bits in the
LVS source ID format.
3.6 PROGRAMMING THE OVERALL CONFIGURATION FUNCTIONS
A new section 3.6.4 has been added and the following subsections are renumbered.
3.6.4 Setting the LVS Address
The LVS ADDRESS menu item is used to set up the LVS address that the 5010-SIE will respond to.
Use the # and $ keys to adjust. Valid numbers are in the range of 01 to 09.
3.8 CHARACTER GENERATOR FUNCTIONS
Then the 5010-SIE is in LVS mode, there are three additional windows known as the LVS Info, CTL,
and Reader Time windows.
Date of Issue: September 26, 2001
VCG CHAR SIZE
Size tiny
Size small
Size large
VCG CHAR STYLE
Style white
Style wh on blk
Style black
Style bl on wh
VCG FRAMES
Frames display
Frames blank
VCG FIELDS
Fields display
Fields blank
VCG SYMBOLS
Symbols display
Symbols blank
ON AIR MODE
On air mode off
On air mode on
Figure 3-3: Overview of Front Panel Menu
Time code is read by the LTC reader and is put into the time bits of the
Model 5010-SIE Source ID Encoder Manual
Manual Change Sheet 1.0-2
VIDEO TYPE
Vtype fixed ntsc
HORZ CHAR SIZE
Horz size 02
DISPLAY LEVEL
Dsplay level = 2
LVS ADDRESS
Gen lvs addr = 02
FACTORY RESET
Shift + select
Page 4 of 5