Table of Contents
Advertisement
3.2.
FRONT PANEL DISPLAY FUNCTIONS
3.3.
ON SCREEN PROGRAMMING MENU - OVERVIEW
OPERATING INSTRUCTIONS
The DISPLAY key is used to select which data is being displayed in the
alphanumeric display. Each time the DISPLAY key is pressed, the front
panel display cycles to the next available display. Currently there are three
types of display data:
SRC ID:
SRC STATUS: STOP
TIME 12:34:56:00
3.2.1. Special Front Panel Indicators
The following special indicators are used between the seconds and frames
digits of the front panel time display to identify non drop frame and drop
frame code (NTSC only)
Non Drop Frame
Drop Frame (NTSC) Period (.)
The key to the operational flexibility of the model 5010-SIE lies in the
powerful on screen programming menu system which uses the built in
character generator. This method of configuring the model 5010-SIE is
quick and simple, guiding you to the correct setup for your application. Six
front panel pushbuttons (!, ", #, $, and SELECT and SETUP) are used
to cycle through the various items on the programming menu.
The 5010-SIE menu system consists of a main menu with three drop down
menus. The titles of each of the drop down menus are shown on the top
line of the character display. Selecting an item on one of the drop down
menus reveals a sub-menu showing the choices for that item. Figure 3-2 is
an overview of the on screen menu system and shows all the menu
choices and where you will find the menu items. Note that some menu
choices will be hidden or
CURRENT MODE depending on the programmed mode of operation.
Model 5010-SIE Source ID Encoder Manual
VTR-10
Source ID Message
VTR Status
VTR Timecode
Colon (:)
show the message NOT APPLICABLE IN
Page 3-4
Advertisement
Chapters
Table of Contents
