Recalling Configurations From The User Presets - evertz 7700 Manual

7700 MultiFrame Manual
7710XUC-HD HD Format Up/Down/Cross Converter
There will be a slight disturbance in the operation of the card and the on-screen
display while the new preset is being recalled.

6.12.1.1. Recalling Configurations from the User Presets

Utilities
Load Preset
Cancel
Default
User1 to 10
525-1080i TB Cut
525-1080i 4:3 Side
525-720p TB Cut
525-720p 4:3 Side
720p-1080i Full
720p-1080i 4:3 Side
720p-1080i 16:9–4:3
1080i-720p Full
1080i-720p 4:3 Side
1080i-720p 16:9–4:3
1080i-525 16:9 LB
1080i-525 4:3 Side
720p-525 16:9 LB
720p-525 4:3 Side
625-1080i TB Cut
625-1080i 4:3 Side
625-720p TB Cut
625-720p 4:3 Side
720p-1080i 50 Full
720p-1080i 50 4:3
Side
720p-1080i 50 16:9–
4:3
1080i-720p 50 Full
1080i-720p 50 4:3
Side
1080i-720p 50 16:9–
4:3
1080i-625 16:9 LB
1080i-625 4:3 Side
720p-625 16:9 LB
720p-625 4:3 Side
7710XUC-HD
-46
This control is used to initiate a recall of the current card configuration from
one of the user presets.
Use the toggle switch to select the preset location where you want to recall
the module configuration. After selecting the preset, you must press the
pushbutton before the recall will take place. You can abort the operation by
pressing the pushbutton when Cancel is displayed.
There are a number of factory-installed presets that may be recalled as well.
These are pre-defined and cannot be overwritten by the user. The factory
presets are:
525i/59.94 ⇒ 1080i/59.94 TB Cut
525i/59.94 ⇒ 1080i/59.94 4:3 Side Panel
525i/59.94 ⇒ 720p/59.94 TB Cut
525i/59.94 ⇒ 720p/59.94 4:3 Side Panel
720p/59.94 ⇒ 1080i/59.94 full raster
720p/59.94 ⇒ 1080i/59.94 4:3 Side Panel to TB Cut
720p/59.94 ⇒ 1080i/59.94 16:9 stretch to 4:3 side panel
1080i/59.94⇒ 720p/59.94 full raster
1080i/59.94⇒ 720p/59.94 4:3 Side Panel to TB Cut
1080i/59.94⇒ 720p/59.94 16:9 stretch to 4:3 side panel
1080i/59.94⇒ 525i/59.94 16:9 letterbox
1080i/59.94⇒ 525i/59.94 4:3 Side Cut
720p/59.94 ⇒ 525i/59.94 16:9 letterbox
720p/59.94 ⇒ 525i/59.94 4:3 Side Cut
625i/50 ⇒ 1080i/50 TB Cut
625i/50 ⇒ 1080i/50 4:3 side panel
625i/50 ⇒ 720p/50 TB Cut
625i/50 ⇒ 720p/50 4:3 side panel
720p/50 ⇒ 1080i/50 full raster
720p/50 ⇒ 1080i/50 4:3 side panel to TB Cut
720p/50 ⇒ 1080i/50 16:9 stretch to 4:3 side panel
1080i/50 ⇒720p/50 full raster
1080i/50 ⇒720p/50 4:3 side panel to TB Cut
1080i/50 ⇒720p/50 16:9 stretch to 4:3 side panel
1080i/50⇒625i/50 16:9 letterbox
1080i/50⇒625i/50 4:3 side cut
720p/50⇒625i/50 16:9 letterbox
720p/50⇒625i/50 4:3 side cut
These presets are available as starting points for configuring the module.
They can be stored as user presets and modified accordingly.
Revision 1.0