On Screen Display - Main Menu - evertz 7700 Manual

7700 MultiFrame Manual
7710XUC-HD HD Format Up/Down/Cross Converter
On all menus, there are two other selectable items: Back and Exit. Selecting Back will take you to the
previous menu (the one that was used to access the current menu) while Exit will return the display to its
normal operating mode. On the main menu, BACK and EXIT will both take you to the normal operating
mode.
Once in a sub menu, there may be another menu layer, or there may be a list of parameters to adjust. If
there is another set of menu choices, use the toggle switch to select the desired menu item and press the
pushbutton.
To adjust any parameter, use the toggle switch to move up or down to the desired parameter and press
the pushbutton. The arrow will move to the right hand side of the line ( ) indicating that you can now
adjust the parameter. Using the toggle switch, adjust the parameter to its desired value. If the parameter
is a numerical value, the number will increase if you lift the toggle switch and decrease if you push down
on the toggle switch.
When you have reached the desired value, press the pushbutton. This will update the parameter to the
selected value and move the arrow back to the left side of the parameter list ( ). Continue selecting and
adjusting other parameters or use the BACK or EXIT commands.
6.2. ON SCREEN DISPLAY – MAIN MENU
The OSD menu is arranged in a layered structure that groups similar configuration items together. The
following section gives a brief description of the first level of menus that appear when you enter the OSD
screens. Selecting one of these items will take you to the next menu level. Sections 6.3 to 6.12 provide
detailed descriptions of each of the sub menus. The tables in sections 6.3 to 6.12 are arranged in an
indented structure to indicate the path taken to reach the control. Menu items or parameters that are
underlined indicate the factory default values.
Note: Some menu items don't appear on all models.
7710XUC-HD
-16
Revision 1.0