Utilities; Selecting The On Screen Display; Recalling Configurations From The User Presets Or The Factory Preset; Table 7-10: Utility Controls - evertz 7710ARC Series Manual

7.7.

UTILITIES

The Utilities menus are used to list the module firmware version, upgrade the firmware, and manage the
user presets. Table 7-10 shows the items available in the Utilities menu. Sections 7.7.1 to 7.7.6 provide
detailed information about each of the parameters.
Status Window
Load preset
Store preset
GPI 1 Action
GPI 2 Action
GPI 3 Action
GPI 4 Action
Upgrade
About...

7.7.1. Selecting the On Screen Display

Utilities
Status Window
enable
disable

7.7.2. Recalling Configurations From The User Presets Or The Factory Preset

The ARC Series modules provide ten user preset areas to store the complete set of controls from the on
screen menu.
Utilities
Load preset
user preset 1 to 10
factory preset
cancel
The current state of the card will be forgotten if it has not been saved to a preset
before a recall is performed.
Enable the Status window
Select a preset to load
Select a preset to save the current configuration
Select preset to recall when GPI 1 goes active
Select preset to recall when GPI 2 goes active
Select preset to recall when GPI 3 goes active
Select preset to recall when GPI 4 goes active
Upgrade the application firmware
Display information about the ARC Series module

Table 7-10: Utility Controls

This control enables or disables the Status Window on all the outputs.
The status window shows the module's status at a glance.
This control is used to recall the current card configuration from one of
the user presets or from the default factory preset.
Use the toggle switch to select the preset you wish to recall. After
selecting the preset, you must press the pushbutton before the recall
will take place.
pushbutton when cancel is displayed.
Revision 1.1
7700 MultiFrame Manual
7710ARC Series - SD Aspect Ratio Converter
You can abort the operation by pressing the
7710ARC-41