Table of Contents
Advertisement
3.
SPECIFICATIONS
3.1.
SERIAL DIGITAL VIDEO INPUTS
Standards:
270Mb/sec SMPTE 259M or 1.485 Gb/sec SMPTE 292M – menu selectable.
SMPTE 260M, SMPTE 274M, SMPTE 296M, SMPTE 349M
Number of Inputs:
1 or 2 (optional based on PGM IN/OUT configuration)
Connector:
BNC per IEC 60169-8 Amendment 2
Input Equalization: Automatic to 100m @ 1.5Gb/s with Belden 1694 or equivalent cable
Return Loss:
SD Standards:
>15 dB up to 540Mb/s
HD Standards:
>15 dB up to 1. 5Gb/s
3.1.
SERIAL DIGITAL VIDEO OUTPUTS
Standard:
270Mb/s SMPTE 259M. or 1.485 Gb/s SMPTE 292M.
Number of Outputs: 3 Per Card (or 2 based on PGM IN/OUT configuration)
2 Per Card SD Only (7710XUDC-AES4-HD only)
Connector:
BNC per IEC 60169-8 Amendment 2
Signal Level:
800mV nominal
DC Offset:
0V ±0.5V
Rise and Fall Time:
SD Standards:
740ps nominal
HD Standards:
200ps nominal
Overshoot:
<10% of amplitude
Return Loss:
SD Standards:
> 15 dB at 540MHz
HD Standards:
> 15 dB at 1.5 GHz
3.2.
ANALOG COMPOSITE VIDEO OUTPUT
Standard:
SMPTE 170M (NTSC), ITU-R BT470-6 (PAL)
Number of Inputs:
2 (only on "-AES4" versions)
Connector:
BNC per IEC 60169-8 Amendment 2
Signal Level:
1V nominal
Output Impedance: 75 Ohm
DC Offset:
0V +/- 50mV
Return Loss:
>45dB to 10MHz
Frequency Response: <+/- 0.1dB to 4 MHz (response will depend on selected filtering)
Differential Phase: < 0.5° (< 0.3° typical)
Differential Gain:
< 0.5% (< 0.3% typical)
SNR:
>75dB (black video, 100kHz to 5MHz)
Output level control range:
Black level control range:
Chroma level control range:
Hue control range: ±15 deg. (NTSC only)
7710XUC-HD HD Format Up/Down/Cross Converter
±10%
±7.5 IRE
±10%
Revision 1.0
7700 MultiFrame Manual
7710XUC-HD
-9
Advertisement
Table of Contents
